Outsourced trimming, deflashing and inspection for injection-molded parts — Johor

Daily collection and return within 50 km of Kulai. 2–3 working days.

Hands cutting a small plastic part from its frame with a knife

Why outsource your post-molding work

  • Keep in-house headcount and labour cost low.
  • Pay per piece, not for idle hours.
  • Capacity that follows your orders up and down.
  • No hiring, training or turnover to manage.

Lower cost of production, higher profit.

What we do

  • A craft knife beside a molded part still on its runner

    Trimming

    Gates, runners and excess material removed by hand.

  • A molded plastic part with runner stubs still attached

    Deflashing

    Flash peeled off by hand, from plastic and rubber parts.

  • A white stereo microscope on a clean white background

    Microscope inspection

    Checked under 10x microscopes, with defects counted per lot.

  • Yellow molded plastic parts heaped in a green bin

    Sorting

    Good parts separated from rejects by eye.

  • A hobby knife and a trimmed plastic part on a workbench

    Rework

    Gate marks, burrs and excess material removed with hand tools.

How it works

  1. Step 1 of 5Every day, our drivers collect your lots from the factory.
  2. Step 2 of 5A team leader assigns each lot to a skilled home-based worker.
  3. Step 3 of 5Each worker finishes the lot at home, then we collect every lot.
  4. Step 4 of 5Lots are checked under 10x microscopes, counted and recorded.
  5. Step 5 of 5Finished lots come back with their delivery order — in 2–3 working days.

Every lot traced, every count recorded

  • Every lot is tracked by its control number, from collection to invoice.
  • Accepted and rejected counts are recorded for every lot.
  • A returned lot is tracked as a new pass of the same lot.
  • Delivery orders and invoices are digital.

Control no. DEMO-0815

PassCollectedReturnedAcceptedRejected
12026-03-022026-03-044,820180
22026-03-092026-03-111764

Delivery order: DO-DEMO-12Invoice: INV-DEMO-07 Billed

Example lot record (made-up data)

In numbers

  • 2018the year we started
  • 20–25skilled home-based workers
  • Up to 2 millionpieces a month
  • 2–3working days
  • 50 kmaround Kulai
A gloved hand placing a sample under a microscope

Quality you can count on

Quality guaranteed by skilled, experienced hands. Every lot is counted and checked before it goes back.

Service area

Based in Skudai, collecting from plants within 50 km of Kulai.

  • Kulai
  • Senai
  • Sedenak
  • Seelong
  • Skudai
  • Johor Bahru
  • Tebrau
  • Pasir Gudang

Questions buyers ask

How fast do you return lots?

In 2–3 working days. Urgent lots or your own schedule can be met — tell us when you need them.

What happens to rejected parts?

They are counted, kept separate and returned with the lot. Every lot's accepted and rejected counts are on its delivery order.

What if we send a lot back to you?

We re-work it as a new pass of the same lot, and both passes stay on the lot's record.

How is billing done?

Per piece handled, accepted and rejected alike, from the delivery orders.

Talk to us

WhatsApp is the fastest way to reach us.

WhatsApp us
Phone
010-545 4173
Email
sales@ktron.my
Address
Jalan Paprika 5, Taman Pulai Hijauan, 81300 Skudai, Johor

Ktron Engineering Enterprise (JM0870519-U)